Before & after video:

The post Spike 2 Click Fix Board appeared first on FlipMods.

JJP recently released an updated IO Driver board that has been used in recent games including Toy Story 4, The Godfather, and Elton John.  This board is almost identical to the existing board, with the exception of the capacitors (C701, and C702)  used for the 70V power section which is used for driving the high powered solenoids, as well as the flippers.

It is possible to retrofit existing older IO Driver boards with these new capacitors which provides the same benefit as the newly designed board, at a fraction of the cost. 

Due to the dimensional differences between the old and new capacitors, the new capacitors are too large to mount directly on the board.  A custom engineered standoff was designed to raise the new capacitor above the board.  Features of this standoff include:

• The base matches the existing footprint of the older capacitor, ensuring that surrounding components on the board are not damaged, or obscured.
• Provides an air gap between the surrounding bridge rectifiers and the capacitors.  This prevents the heat generated by the bridge rectifiers from conducting to the capacitors.
• Provides accessibility to the surrounding fuses.
• Polarity labeling (+ and -) to easily identify proper orientation while installing the assembly.
• The top matches the diameter of the new capacitors to maximize surface area for maximum adhesion between the capacitor and the standoff.

Click the tabs below for additional information.

By using this modification, you acknowledge and agree that you are solely responsible for any consequences, including any damage or issues that may occur.

The post JJP Soft Flipper Fix Kit (SFFK) appeared first on FlipMods.